Home > washing > Wash36
wash 36 breathing mask cleaning machine

Wash 36

Breathing mask cleaning machine

Key features:

The washing machine Wash36 is specially developed for professional cleaning of breathing air masks in large quantities. The Wash36 has the capacity to clean 36 masks per cycle. For this purpose, a pin frame is mounted on two levels, with each frame holding 18 masks.

In the wash section, the products are sprayed on all sides with a large quantity of water from a moving wash frame. A detergent may be dissolved in this water. The washing water returns to the wash tank via a removable filter. An overflow and supply of clean tap water keep the level in the wash tank constant. The water level in the wash tank is also protected by a low level cut-out. The water in the wash tank is heated, and a digital temperature controller regulates the heating system.

The wash section components include:
  • A centrifugal pump for the main wash
  • A level sensor as low level-cut-out and high and low water control system
  • An overflow in the wash tank
  • A wash tank with approximately 90 liters capacity and a rinsing tank of about 20 liters
  • A water discharge pump to drain the wash tank
  • A removable filter
  • A moving wash frame with wash nozzles for the main wash and a second system with stainless steel nozzles for the rinse cycles

The rinse section uses clean tap water. A magnetic valve on the rinse water supply pipe maintains the tank level automatically via level switches. The water consumption is approximately 20 liters per wash cycle. The centrifugal rinse pump directs water through stainless steel nozzles in the moving wash frame. After rinsing, the water returns to the water tank through a filter basket.

The motor compartment is located on the back of the machine, while the control panel is at the front. A water filter is installed in the water pipe, just before the magnetic valves.

For safety, the machine features a main circuit breaker—a red/yellow switch—on the control panel, which allows for immediate shutdown in case of an emergency or fault.

Dimensionsheight x width x depth in mm
External1800(2410*) x 1335 x 850(1445*) *with open hood and extended drawer
Wash place685 x 1030 x 610
Weight400 kg
Externalgrinded stainless steel type 304
Internalstainless steel type 304
Doors1 piece, vertical closing (front loader), with 2 handles and door Security/Emergency stop
Wheels4 castors (inhibited)
ControlSiemens PLC
Wash pump power3,0 kW
Wash pump capacity1100 liter/ per min. at 1,5 bar
Wash tank capacity90 liter
Heating9 kW
Three wash cycle times5, 10 and 22 minutes
Wash temperatureadjustable to 55°C
Wash systemmoving wash frame with stainless steel nozzles on 4 sides
Cleansing dosageautomatic, adjustable
Power rinse pump370 Watt
Water rinse tank capacity20 liter
Heating9 kW
Rinse timeadjustable (by factory)
Rinse water temperaturemax. 55°C
Rinse systemmoving rinse frame with stainless steel nozzles on 4 sides
Neutralization doseautomatic, adjustable
Drain pump80 Watt

  1. Cabinet door
  2. Filter (inside washing area)
  3. Electrical cabinet/door
  4. Motor + wash tank compartment
  5. Cabinet door hinges and gas springs
  6. Control panel
  7. Main Switch
  8. Castors

Home > washing > Wash36